thomasshare5

Sliding Patio Doors Repair It is possible for sliding patio doors to be difficult to open and close. This could be due to a variety of problems like dirty tracks or misaligned sliders. Clean and lubricate your rollers. You can also adjust the rollers by using the adjustment holes on the bottom side of the door panel with movable doors. Tracks that are damaged or dirty A damaged or dirty track can cause a sliding door to not move properly. Over time, dirt, grit and even corrosion can form and stop the track from moving smoothly. The solution is to thoroughly clean with the use of a brush and mild detergent. It is best to do this task frequently to ensure the smooth operation of your door and avoid the need for costly repairs later on. A door that is leaky is another frequent issue that requires immediate attention to avoid the growth of mold, water damage and structural degradation. Most often, the issue is due to worn weather stripping and misaligned doors, which can be fixed by replacing old weather strips and by aligning the door. Rollers that bounce off the track are another common issue that can be fixed with some simple DIY work. Find a friend to assist you in this endeavor, as the door can be heavy. To reposition the rollers in the house, you must stand and lean one of the panels towards you. After lifting the panel off the bottom track, it's time to place it on sawhorses in order to prevent it from falling off. Then loosen the screws that hold each roller in place and take them off using the help of a screwdriver. Now you can remove any dirt that is stuck between the tracks and the wheel. Clean each wheel with denatured alcohol on a cloth. Reposition the wheels back to their tracks and attach them again. If a portion of the track is bent, it might be possible to straighten it using the help of a rubber mallet and a block of wood. However when the bent section is located near the hinges and is likely to cause further damage, you'll be better off calling in a professional for safety reasons. Rollers that are not aligned If your sliding door isn't sliding as smoothly it's because the roller wheels are misaligned with the track. sliding patio door repairs near me could be dirty, rusted, or their bearings are worn out. This friction causes the door to snag and grind when it's opened or closed. This can also cause the sound of squeaking. Fortunately it's a simple fix. You don't have to remove the door to get at the wheels since they are located on a bracket that's adjustable. Find the adjustment holes (usually on the opposite side of the frame) and make use of a screwdriver to turn the screws that control the wheels. By turning the screw clockwise, you raise the wheel, whereas turning it counterclockwise will lower it. Continue to adjust the door until it opens and closes effortlessly. It is essential to adjust the wheel prior to adjusting your latch. To ensure that the lock functions correctly the latch hooks have to be aligned with the strike plate. If you don't do this, the latch could accidentally open or close when you're not in the room. Sliding patio doors are an investment, and ensuring they are operating properly can keep your family safe and secure. You can avoid costly repairs by fixing problems that are common, like broken tracks, rollers and handles. If you need help with your patio doors, contact our team. We can evaluate your needs for repair of your sliding patio door and help you keep it in good condition. Our professionals can also help with any replacement parts you may need. The door frame is damaged or damaged Sliding patio doors are an excellent addition to any home. They provide a convenient and attractive alternative to hinged or swing-open doors for patios. Like any other type of hardware that they are, they could face a variety of problems in time. A lot of these issues are easy to fix with a little DIY expertise. A common issue that affects sliding patio doors is a gap in the frame. It could be caused by a variety of factors, such as a an improperly aligned track or rollers, a damaged track or door, or a bowed door frame. Most of the time the reason for this issue is easily remedied by removing the door and re-attaching the track or rolling elements. It is essential to be very careful not to harm the frame or track. In some cases, it may be necessary to replace the entire track. This can be done easily with a universal replacement kit that is readily available at major hardware stores. These kits are simple to install and will get your door functioning properly again in no time at all. Examine the hardware of your sliding door and frame for signs of wear, such as loose screws or bolts. This is an easy and effective DIY patio maintenance procedure that is done using the help of a screwdriver. It is also essential to grease the tracks and rollers of your patio door to ensure smooth operation and avoid premature wear. For many homeowners, their patio doors are the primary entrance to their backyard and outdoor living space. To ensure peace and security within the home, it's essential that they function properly. If you follow these easy DIY maintenance tips, homeowners can extend the lifespan of their sliding patio door and reduce costly repairs or replacements. Handle is not working properly Patio doors that slide open are the perfect way to access your backyard and also enter your home, but they aren't always easy to operate if they are misaligned or damaged. A damaged handle could cause the door to become stuck or difficult to open and close. The good part is that repairing a loose handle is a relatively simple task that can be completed at home. In most cases the loose grip is a result of screws that have fallen out of the backplate. To fix the problem, tighten the screws that are on the inside of the handle using a screwdriver. If the handle remains loose it could indicate that the threads have worn out and require replacement. Alternatively, a broken latch might be the culprit. This is more likely to occur if the latch is made of plastic, not metal. If the latch isn't catching or turning, you should try oiling it first to see if this aids. If not, you may have to replace the lock entirely. If the handle is cracked or broken, it can be difficult to use. If this is the case, it will be necessary to replace it with a new handle that matches the style of your sliding patio door. Feldco can help restore your patio doors back to their former splendor, whether they're brand new or old and old-fashioned. We have doors of high-quality in various sizes and styles that can be adapted to match your home perfectly. Contact us today to learn more about our products! We proudly serve homeowners throughout Southern California, including Ventura County, Orange County & San Diego County. Faulty weatherstripping It's time to change your weather stripping if you see light in the windows and doors, or sense a draft pulsing at the window or door. These strips create an airtight seal that prevents unwanted air, pests and water from entering the home. This keeps your conditioned and heated air in, thereby saving money on energy costs. It may have lost its strong, bouncy seal due to age. It is easy to determine this by putting a dollar bill under the seal at the top and bottom of the jamb and door frame where they overlap. If the dollar bill slides easily between the seal and the door easily it is time to replace the weatherstripping. If you replace only the worn-out part of the weather stripping, it could cause future problems with the seal. It's much more efficient to replace the entire stripping. This will allow you to be sure that your door will be sealed properly. To make a DIY project that is simple follow our guide on weather stripping to remove the old weather stripping and install the right material to your sliding patio door and door frame to create a durable solid, secure seal. It's a great option to repair your door and cut your energy bill and you shouldn't wait until it's too late. Your wallet and your home will be grateful.